Press Fit Sweep Clock Movement (12mm Shaft)

Press Fit Quartz Clock Movement With Fittings

This press fit quartz clock movement includes a sweeping (non-ticking) press fit movement with all necessary fittings to assemble together.

Important note: You must select the appropriate shaft length that you require from the drop down menu prior to purchasing. There are a number of options to choose from.

Please read all of the information in the description below carefully to ensure the movement will be an appropriate fit.

Included:

1 x Continuous sweep/non-ticking press fit movement-available in assorted shaft lengths (more information below)

Movement measures 56 x 56 x 16mm (not including shaft length)

1 x Pack of fittings (rubber washer, metal washer & hex nut)

1 x Assembly instructions

Requires 1 x AA Alkaline battery (or LR6 Alkaline), not included

There is no hanger included, if you require a hanger you can find the correct one here: Metal Clock Hanger

We recommend changing your movement battery once a year using a high quality alkaline battery, such as Duracell or Panasonic. 

Hand Hole Dimensions (Collet)

• Minute: 3.5mm 
• Hour: Ø5.5mm

Please refer to the following guide to choose the most accurate shaft length:

12mm shaft suits dials 0-3mm thick
16mm shaft suits dials 0-6mm thick
19mm shaft suits dials 0-10mm thick
22mm shaft suits dials 0-13mm thick
28mm shaft suits dials 0-18mm thick

Please Note: Hands or hanger are NOT included with this movement by default, however they are available to purchase seperately via the links below: 

Hour & Minute Hands, click HERE.

Seconds Hands, click HERE

Hanger, click HERE

This movement is compatible with our standard press fit minute hands measuring up to 160mm in length/weighing up to 8 grams.

If you have larger hands, you will need a high torque movement- available to purchase HERE.

What Is The Difference Between A Standard Press Fit and A German Press Fit Movement?

The main difference between a standard press fit movement and a German press fit movement comes from the hand hole dimensions which have slightly different measurements. It is important to measure your existing hand hole dimensions prior to purchasing, to ensure you find the correct replacement. In addition, the finished appearance between the two movements differs slightly- a German press fit movement uses a centre fixing nut to secure the movement to a clock (which requires a slightly larger dial hole and thickness), whilst a standard press fit movement instead uses a hex nut and a brass thread. Please be sure to check the diameter of your dial hole and hand hole dimensions prior to purchasing to ensure you select the most suitable movement.

The Importance Of Getting Correct Measurements

In order to find a correct replacement, you will first need to gather a few measurements and information from your current movement. A model number alone does not provide enough information to replace a movement- you will also need to determine the following:

1. Type of movement/hands you are replacing (press fit, euro shaft or high torque)

Your current minute hand will be able to easily indicate what type of movement you have. Simply examine the hole in your minute hand. 

• If it is round or has a hexagonal looking eyelet, and if the hand pushes onto the shaft then your movement is a press fit movement
• If the hole has two straight sides and a rounded top and bottom, then your movement is a euro shaft movement
• If your minute hand is over 160mm in length then we strongly recommend that you use a high torque movement

Please note, your minute hand hole should be visible. If there is anything protruding from your original minute hand then you may have removed the minute shaft with the hand by accident. To separate this shaft from the minute hand you will need to unscrew the hand nut on the front of the hand.

2. Hand Hole Dimensions (Shaft Diameter Of Hands)

As the shaft diameter for all hands varies significantly, your original hands may not be compatible with the replacement movement that you select. It is important that you measure the hand hole dimensions to confirm whether it is a match. If not, you can order replacement hands that will be compatible with your replacement movement. In addition, the total length of the hands are measured from the centre of the hole to the tip, not from end to end.

3. Total Shaft Length Of Your Current Movement

Measure the total shaft length of your old movement by measuring from the face of the movement to the very end of the shaft. This measurement is NOT just the threaded part of the shaft, it is the entire shaft. It is important to get accurate measurements especially if your clock had a lens. We also recommend measuring your dial thickness to ensure the replacement movement will be a suitable fit.

4. Follow Our Guide

For more detailed information on how to get these measurements, we have created an easy to follow guide (with pictures) and an additional video link which you can view here: Step-By-Step DIY Clock Movement Replacement Guide

Please note, it is very important that you have gathered this information correctly prior to purchasing. 

Disclaimer: The information provided serves as a guide only and may not be specific or true for every type of clock. Clock Shop is not responsible for any alterations or damages which may be made from the information provided, and customer discretion is always advised.